| Description |
- The Sapphire Mayfair range of projection screens are truly a work of art. We
use only the best quality materials and each one is tested at length before
leaving the factory.
- Although it is difficult to convey the screen quality online. The triple
laminated glassfibre surface is designed to lay flat with no curls extending
into the viewing area. The gain is 1:1 which we consider best for modern
projectors which have plenty of brightness. The viewing angle is very wide and
the black border all around marks the image and improves your perception of the
contrast ratio.
- The screen fabric has black backing meaning you can place the screen in
front of a window and no light will come though the projector screen fabric.
- Fitting onto a plaster wall or ceiling is simplicity itself, thanks to the
unique channel fix brackets. You will not find an easier screen to install.
Please view the flash movie below to see more about the installation method.
The price of Sapphire Screens is comparable with many lower quality
offerings. We put our faith in the product by
offering a three year warranty - this will give you complete piece of mind. Make
sure you consider this important aspect before buying an inferior
product.
All Sapphire Mayfair projection screens come
with a remote control. This model has an inline switch and radio receiver box
around 1.3m from the casing. There is a further 1.3m of cable to a plug the
other end of the control box. It will operate at up to 30 metres in the right
conditions. Unlike IR, radio does not require line of sight.
In situations where you want to fit an inline switch or connect this to a
240v relay then the RAD screen in the one to buy -not the infra red as it has
four core wires to the inline box (earth,neutral,live drop, live retract).
Should you want an RS232 solution from Sapphire, you need to buy the
screens ending with ATR and an optional module.
Weight KG's - 14.7 | * 1:1 gain triple laminated glass-fibre white screen fabric |
| |
